sale@tonyhk.hk

Drying Oven DHG-9030A-Laboratory Drying Oven-Direct Manufacturer

HTE 005 200℃ and 250℃ Laboratory Multi type Air Dry Oven HTE 005 200℃ and 250℃ Laboratory Multi type Air Dry Oven
HTE 005 Laboratory Multi type Air Dry Oven 200℃ and 250℃ HTE 005 Laboratory Multi type Air Dry Oven 200℃ and 250℃
Drying Oven DHG-9030A Drying Oven DHG-9030A

Product Introduction

Drying Oven/Laboratory Drying Oven.It’s applicable in industrial and mining enterprises, research institutes, medical and health units for drying.

Provided for desiccation, torrefaction, wax-melting and sterilization in mining industry, laboratories and scientific research institutes.

Youtube video :Click here

Structural Description

 1. DHG type blower drying oven is a series of products, which can be divided into table type and vertical type according to the appearance, and divided into different specifications and varieties according to the size of the working room and the temperature control range.

2.The outer casing of the drying box is made of high-quality steel plate surface sprayed with plastic, the studio is made of high-quality stainless steel plate, and the shelf made of stainless steel wire in the room can be adjusted arbitrarily, and the middle layer is filled with ultra-fine glass wool for heat insulation.

3. The desktop box door adopts double-layer tempered glass door or observation window, and the vertical box door has a double-layer tempered glass observation window on the upper middle, so that the heating items in the box can be clearly observed.

4.The joint between the working room and the box door is equipped with a high temperature resistant silicon rubber sealing ring to ensure the seal between the working room and the box door. The power switch with indicator light, temperature controller and other operating elements are all concentrated on the control panel in front of the cabinet, which is beautiful and easy to operate.

 5. The heating and constant temperature system in the oven is mainly composed of a special low-noise motor for the oven equipped with a centrifugal impeller, an electric heater, a suitable air duct structure and a temperature sensor. When the drying box is powered on, the motor runs at the same time, and the heat generated by the electric heater placed directly on the bottom or back of the box is discharged upward or forward through the air duct, and then sucked into the fan after passing through the dry items in the working room, so that the cycle continues to even out the temperature.

 6. The damper regulator of the desktop and vertical large-volume blast drying box can adjust the air volume in and out of the box in a small amount by opening the damper adjustment knob.

 7. Microcomputer intelligent temperature controller adopts self-tuning PID technology. Compared with traditional PID control, it has the characteristics of rapid temperature control, fast response, small overshoot and high precision.

8. Both the set temperature and the temperature in the box have digital display at the same time, with an upper limit. Tracking alarm and digital timer function, the timing can be up to 9999 minutes. Use light touch buttons to set parameters, easy to operate.

Technical Specifications

Desktop:Model:DHG-9003 

Model

9023A

9053A

9123A

9203A

Voltage

                                                         220v,50HZ

Power

810W

1090W

1850W

2350W

Temperature Control Range

                                          Temperature:+10~200 degrees

Temperature Fluctuations

                                                                  ±1 degree

Track Alarms

                                                                  +10 degrees

inside idimensions(mm)

300x280x275

420x355x350

550x355x550

600x550x645

Vertical:Model DHG -9000

Model

9030A

9070A

9140A

9240A

Voltage

220v,50HZ

Power

700W

1100W

1600W

2200W

Temperature Control Range

                                            room temperature:+10~200 degrees

Temperature Fluctuations

                                                                      ±1 degree

Track Alarms

                                                                      +10 degrees

inside idimensions(mm)

300x300x350

400x400x450

450x550x550

500x600x750

Vertical:Model: DHG-9006

Model

9036A

9076A

9146A

9246A

Voltage

                                                             220v,50HZ

Power

950W

1400W

2000W

2600W

Temperature Control Range

                                                room temperature:+10~300 degrees

Temperature Fluctuation

                                                                   ±1 degree

Tracking Alarm

                                                                   +10 degrees

Dimensions of the Working Room(mm)

300x300x350

400x400x450

450x550x550

500x600x750

 

Vertical:Model: DHG-9008

Model

9038A

9078A

9108A

9148A

9248A

Voltage

                                                                            220v,50HZ

Power

1200W

1830W

2000W

2400W

3250W

Temperature Control Range

                                                           room temperature:+10~400 degrees

Temperature Fluctuation

                                                                             ±1 degree

Tracking Alarm

                                                                             +10 degrees

Inside Idimensions(mm)

300x300x350

400x400x450

450x450x500

450x550x550

500x600x750

 

Vertical:Model: DHG-9423A/DHG-9923A/DHG-9623A/DHG-9426A/DHG- 9626A

Model

DHG-9423A

DHG-9923A

DHG-9623A

DHG-9426A

DHG-9626A

Voltage

220v,50HZ

                                                        380V,50HZ

Power

2540W

5150W

3700W

3580W

5800W

Temperature Control Range

    room temperature:+10~200 degree

room temperature:+10~300 degrees

Temperature Fluctuation

                                                             ±1 degree

Tracking Alarm

                                                             +10 degrees

Inside Idimensions(mm)

600x550x1300

900x800x1400

800x600x1300

600x550x1300

800x600x1300

Features

1. 304 stainless steel, mirror polishing processing, easy to clean and maintain.
2. PID controller with over temperature alarm and timing function ensures precise and reliable control.
3. Air circulation system with specific air flow channel ensures a good temperature uniformity performance.
4. Silicon door gasket with long lifetime, and easy to change.
5. A damper adjustment in the front ensures the gas convection enough in working chamber.

Related Products

Share This Product