Precautions For The Use Of Rain Test Chamber Equipment
Precautions For The Use Of Rain Test Chamber Equipment
In the rapid development of science and technology, a variety of precision instruments have appeared in people’s side, such as test box equipment, trust that many people know the existence of this equipment, but also trust that many people have used this equipment, of course, the type of test box equipment in each field is also different, rain test box equipment is one of many types. In order to make better use of the rain test box equipment, do you know the precautions for the use of the rain test box equipment?
Precautions for the use of rain test chamber equipment:
- Test chamber equipment to prevent collision and rain;
- Prevent chemical substances from coming into contact with the rain test chamber equipment;
- Identification of power supply and ground wire;
- The rain test chamber equipment should be equipped by professionals;
- After the inspection, the entire power supply is cut off;
- The necessary equipment for the sewage discharge system must be in place;
- The laboratory should be equipped with ventilation equipment and maintain indoor ventilation;
- The power cord is correctly connected according to standards and grounded;
- To prevent dust from invading the equipment, use a plastic cover after use;
- Check the circuit control system before each start;
- Delete samples after each inspection and install a sorting slot;
- When the rain test chamber equipment is in a non-working state, it should be kept dry. The water will be discharged before drying the working room and frame;
- The rain test chamber equipment has been operated for a long time. If the air holes are found to be blocked, it is necessary to remove the pipes and wash them with clean water after assembly;
- If you hear noise while working outside, please stop the inspection and restart after finding any defects and correcting them to avoid affecting the service life of the equipment;
- Before operating the rain test chamber equipment, check whether there is a sufficient water tank. If not, please fill it with water. Clean water must be added to prevent damage to the pump.
Conclusion
No matter what kind of test chamber equipment, we must pay attention to the operation of the test chamber equipment to ensure the accuracy of the equipment measurement data and achieve the intention of inspection.