Twins Baby Stroller Uneven Road Dynamic Tester TC-007-Manufacturer
Twins Baby Stroller Uneven Road Dynamic Tester TC-007
Twins Baby Stroller Uneven Road Dynamic Tester TC-007-.Produce base on EN1888 regulation. Test method: just baby model into stroller and fixed stroller on the bench, set the test time and speed. once the test finished check the stroller to see if there is any damage.
Standard:
BS EN1888 – 5.10 Irregular surface test equipment;
8.10.3 Irregular surface test
Technical Specifications
Bench | double seat (left and right) |
Load | max. 100lbs |
Test speed | approx. 8km/h |
Troller fixed handle | weaving clamps |
Drive wheel diameter | 300mm with Durable Rubber Compound coating |
Aluminum rigid block | base on EN1888, 4 different road condition, have A, B type rigid block |
Rigid block fix method | base on EN1888, use carbon steel screw fix on conveyer belt |
Timer | 0-999 hour, convertable to seconds, minutes, hours and backup data for power off |
Speed display | LED display, show by m/min |
Motor | gear reducer moter, 3P |
Power | AC220V 50Hz |
Size | 1900*1260*2100 (L×W×H) |
Features:
The surface of the irregular surface test equipment shall comprise two types of obstacles: Type A and Type B.
These obstacles shall be mounted on a conveyor system so that the wheels on each side of the vehicle are lifted alternately. The conveyor system shall run at a speed of (5 ± 0,1) km/h.
Standards
BS EN1888-2012 5.10 Irregular surface test equipment;
8.10.3 Irregular surface test