sale@tonyhk.hk

EN Drop Test Floor TW-200B-Manufacturer-HUST TONY

EN Drop Test Floor TW-200B-Manufacturer-Hust Tony.Test the damage of toys dropped from a specific height.Conforms to EN71-1-2014+A1-2018 test standard. EN Drop Test Floor TW-200B-Manufacturer-Hust Tony.Test the damage of toys dropped from a specific height.Conforms to EN71-1-2014+A1-2018 test standard.
EN Drop Test Floor TW-200B-Manufacturer-Hust Tony.Test the damage of toys dropped from a specific height.Conforms to EN71-1-2014+A1-2018 test standard. EN Drop Test Floor TW-200B-Manufacturer-Hust Tony.Test the damage of toys dropped from a specific height.Conforms to EN71-1-2014+A1-2018 test standard.

EN Drop Test Floor TW-200B

EN Drop Test Floor TW-200B  is to determine the toys fall on the floor through a certain height, fall in a certain number, then check whether the hazardous sharp points, hazardous sharp edges, hazardous small parts and hazardous driving mechanisms have become accessible.

It meets standard:

EN71-1-2014+A1-2018 8.5

Technical Specifications

Model

TW-200B

Drop Height

(850±50)mm

Steel Plate Thickness

4mm

Rubber Underlaver Thickness

2mm

Rubber Shore A Hardness

(75士5)

Product Size

600mm*600mm*6mm (L * W * H)

Net Weight

10 kg

Scope of application

 It is suitable for toys used by children aged 96 months and below.

Children 96 months and younger cannot carry large toys for drops, so large toys are exempt from the drop test.

 In order to ensure the safety of actual use, the electric toy should be equipped with a battery in the drop test.

 

Test Procedure: Drop the toy down to the floor in the strictest direction and at a certain height, after dropping a certain quantity of parts, check the usability of dangerous sharp points, dangerous sharp edges, dangerous parts and dangerous driving parts.

 

Judgment Criteria: toys designed for small children who can’t sit up alone should not be cracked,if the crack does not cause damage obviously,it is acceptable.Toys designed for children under 3 years should not produce small parts, contactable sharp point and sharp edge.

 

Masks and helmets should not have exposed cusps, edges, or loose materials that can enter the eye. The driving mechanism that becomes accessible should not be harmful.

 

Standards

EN71-1-2014+A1-2018 8.5

Related Products

Share This Product