TNJ-005 Drawer Durability Furniture Testing Machine

TNJ-005 Drawer Durability furniture Testing Machine (5) TNJ-005 Drawer Durability furniture Testing Machine (5)
TNJ-005 Drawer Durability furniture Testing Machine (3) TNJ-005 Drawer Durability furniture Testing Machine (3)
TNJ-005 Drawer Durability furniture Testing Machine (4) TNJ-005 Drawer Durability furniture Testing Machine (4)

Designed to test drawers, desks, cabinets and wardrobe.

Drawer Durability Tester is used to test the durability of the drawer slides of furniture.

Apply a certain load inside the drawer, repeated pull-out and close of the drawer.

 
 
 

Standard : ANSI BIFMA X5.1.15/16 Backrest Durability Test, EN 1335:2000, QB/T2280-2007

Technical specifications

Drawer size: 150-1300mm/adjustable

Loading: 0-100N, overloading shutdown can be set

Speed: 0.3—2m/s

Test Stroke absolute error: ≤±0.25m

Stroke Control range: 0.05—99.9km degree0.25m

Measure time absolute error: 0.1secs

The parameters above can be adjusted according to customer’s requirement,such as the damage range,stroke,time to shutdown. Etc.

Machine Size (L*W*H): 800*600*1200mm

Feature

1.The EPC will register every stroke of the cylinder up to six (6) digits,
2.Will stop the test operation to the preset stroke,
3.The EPC will display the number of stroke achieved during the test,
4.EPC also able to store the number of cycles when the power interruption take place and able to display the actual reading and continues counting when operation resumes
5.The signal shall maintain until the counter is reset
6.Note: one stroke is counted as one cycle

Standards

ANSI/BIFMA X5.1.15/16 Backrest Durability Test, EN 1335:2000, QB/T2280-2007

Related Products

Share This Product