Vertical Raindrop Shelf Tester WT-03-Supplier

IEC60529 waterproof test equipment IEC60529 waterproof test equipment
WT 03 Vertical Rain Drip Tester Removable model 02 WT 03 Vertical Rain Drip Tester Removable model 02

Vertical Raindrop Shelf Tester WT-03

Vertical Raindrop Shelf Tester WT-03-Waterproof Testing Machine is applied to test the water tightness of enclosures of automotive parts, outdoor lamps and electronics parts.


For electrical products, outdoor lamps, electrical cabinets, electrical components, automobiles, motorcycles and their components and other products in simulated rainy climate conditions, the physical and other related properties of the product tested.

After testing, the performance of the product is determined to meet the requirements, in order to facilitate product design, improvement, verification and factory inspection use.

Technical Specifications



Apply to The Product

IPX1, IPX2 test

Raindrop Area


Diameter of The Drip Hole


Diameter of The Turntable

600 mm

Height of The Turntable

600 mm


1-3 mm/min(+0.5mm/min)

Water Volume Regulation

Manual control

Raindrop Board Lift Range

800-1800mm adjustable

Turntable Lift Range

Non-adjustable, fixed

Turntable Loads


Angle of The Turntable

0°OR 15°(Horizontal direction)

Turntable Speed

1 r/min(IPX1)

Test Time

0-999 min

Safety Protection

Leakage protection, water shortage protection, short-circuit protection

Power Supply

AC220V+10%;50Hz 1.0kw, Fire line+zero line+protective ground Line(Resistance<4Ω)

Sample Load Power Supply



1. Touch screen control, independently developed operating interface (based on customer requirements to install multiple languages), can directly choose waterproof level, the device will automatically in accordance with the standard terms of the waterproof rating conditions for testing;

2. Core control components use 7-inch touch screen + Panasonic PLC, and electrical components are made using imported brands such as LS .

3. Sample loading table using stepper motor, rotation speed and standard angle can be controlled by touch screen, IPX1 standard speed: 1r/min; IPX2 angle test can be completed automatically: 2.5min rain in 4 positions.

4. With air drying function, after the completion of the test, the water in the drip tank can be removed clean, to avoid long-term water fouling and block the pinhole.

5. The rainboard automatically rises and falls , it can automatically stops when the nozzle is located at the highest point of the tested object at 200mm.

6. Rainfall: with adjustment valve, can be adjusted manually.

7. The nozzle contact bit brass cone design makes it easy to change the needle without tools, and a stainless steel mesh shield is installed under the needle to prevent the test operator from being injured when the head touches the test needle.

8. Rain-drip plate: the use of vacuum design, the use of high rust-proof stainless steel material manufacturing.

9. Column structure, equipment running smoothly, the main frame can be packaged as a whole, convenient transportation, saving installation time.

10. sample turntable: US304 stainless steel plate processing and manufacturing.

11.The test chamber is equipped with a sample power outlet (standard AC220, 10A; can be customized on demand), then sample can be tested live.

12. The equipment base is equipped with 4 moving casters for easy movement and fixation.

Terms of use

WT 04


IEC60529:1989 +A1:1999 +A2:2013《Degrees of protection provided by enclosures(IP Code)》

GB/T4208-2017 Housing Protection Rating (IP Code) 14.2.1, 14.2.2 and Figure 3

GB7000.1 Lamps Part I: General Requirements and Trials 9.2.3

Related Products

Share This Product