Rain Test Chamber WT-01-Instrument Manufacturer

Vertical Rain-Drip Tester Vertical Rain-Drip Tester
Vertical Rain-Drip Tester Vertical Rain-Drip Tester

Rain Test Chamber WT-01

Rain Test Chamber WT-01 Simulate the damage of natural water (rain, seawater, river water, etc.) to products and materials, and waterproof testing of product casings.





For electrical products, outdoor lamps, electrical cabinets, electrical components, automobiles, motorcycles and their components and other products in simulated rainy climate conditions, the physical and other related properties of the product tested.


After testing, the performance of the product is determined to meet the requirements, in order to facilitate product design, improvement, verification and factory inspection use.


1. Touch screen control, independently developed operating interface (based on customer requirements to install multiple languages), can directly choose waterproof level, the device will automatically in accordance with the standard terms of the waterproof rating conditions for testing;

2. Core control components use 7-inch touch screen +Panasonic PLC, and electrical components are made using imported brands such as LS .

3. Sample loading table using stepper motor, rotation speed and standard angle can be controlled bytouch screen, IPX1 standard speed: 1r/min; IPX2 angle test can be completed automatically: 2.5min rain in 4 positions.

4. With air drying function, after the completion of the test, the water in the drip tank can be removed clean, to avoid long-term water fouling and block the pinhole.

5. The rainboard automatically rises and falls , it can automatically stops when the nozzle is located at the highest point of the tested object at 200mm.

6. Rainfall: with adjustment valve, can be adjusted manually.

7. The nozzle contact bit brass cone design makes it easy to change the needle without tools, and a stainless steel mesh shield is installed under the needle to prevent the test operator from being injured when the head touches the test needle.

8. Rain-drip plate: the use of vacuum design, the use of high rust-proof stainless steel material manufacturing.

9. Equipment shelf: manufactured from high-quality aluminum profiles.

10. sample turntable: US304 stainless steel plate processing and manufacturing.

Technical Specifications



Apply to The Product

IPX1, IPX2 test

Raindrop Area


Diameter of The Drip Hole


Diameter of The Turntable

600 mm

Height of The Turntable

600 mm


1-3 mm/min(0.5mm/min)

Water Volume Regulation

Manual control

Raindrop Board Lift Range

800-1800mm adjustable

Turntable Lift Range


Turntable Loads


Angle of The Turntable

0°OR 15°(Horizontal direction)

Turntable Speed

1 r/min(IPX1)

Test Time

0-999 min

Safety Protection

Leakage protection, water shortage protection, short-circuit protection

Machine Dimension

1230 mm*1340 mm*2430 mm

Power Supply

AC220V+10%;50Hz 1.0kw, Fire line+zero line+protective ground Line(Resistance<4Ω)

Sample Load Power Supply


Standard Accessories

1 Pcs

Filter element

100 Pcs

Test needles

20 pcs

Brass drip pin holder

Terms of use

IEC60529 Vertical Rain-Drip Tester



GB/T4208-2017 Housing Protection Rating (IP Code) 14.2.1, 14.2.2 and Figure 3

GB7000.1 Lamps Part I: General Requirements and Trials 9.2.3

VW80000-K10: IPX1, IPX2

Related Products

Share This Product